D'occasion timer & counter

CBS S-1500

Numéro d'objet: B00004708 | Nom de l'objet: CBS S-1500 | Autofill power requirements: 120 Volt AC, 1 AMP

Keysight Technologies 33511B

• Fabricant: Agilent - Keysight
• Modèle: 33511B

Channel/port count: 1 | High frequency (range): 10MHz ＜= 100MHz | Better signal integrity: Get the waveform you want, regardless of frequency or sample rate. | Lower harmonic distortion: Measure your design chara...

Keysight Technologies 33510B

• Fabricant: Agilent - Keysight
• Modèle: 33510B

Channel/port count: 2 | High frequency (range): 10MHz ＜= 100MHz | Better signal integrity: Get the waveform you want, regardless of frequency or sample rate. | Lower harmonic distortion: Measure your design chara...

Tektronix AWG5208

• Fabricant: Tektronix
• Modèle: AWG5208

Channel/port count: 8 | Maximum sample/data rate: 10 GS/s | Seamless transition from simulation to generation: If a waveform can be defined or captured, then the AWG5200 can reproduce this signal. The creation of...

XINYUE CZ-48my Spline Cold Forming Rolling Machine

• Fabricant: Xinyue

Technical parameter: CZ-48MY Unit | Loaded tool length: 48 Inch | Max. module: 2.00 m | Max. teeth diameter: 60 mm | Workpiece length: 800 mm | Cylindricity: 0.02 mm | Roughness: 0.4-1.6 μm | Max. roll forming le...

XINYUE CZ-24my Spline Cold Rolling Forming Machine

• Fabricant: Xinyue

Technical parameter: CZ-24MY Unit | Loaded tool length: 24 Inch | Max. module: 1.25 m | Max. teeth diameter: 40 mm | Workpiece length: 800 mm | Cylindricity: 0.015 mm | Roughness: 0.4-1.6 μm | Max. roll forming l...

XINYUE spline cold rolling machine CZ-16MY 24MY 36MY 48MY

• Fabricant: Xinyue

XINGYUE CZ-36my Spline Cold Roll Machine

Technical parameter: CZ-36MY Unit | Loaded tool length: 36 Inch | Max. module: 1.75 m | Max. teeth diameter: 50 mm | Workpiece length: 800 mm | Cylindricity: 0.015 mm | Roughness: 0.4-1.6 μm | Max. roll forming l...